web stats
S16 MTM AMMO INSERT | Mysite
Contact Us
(+44) 01633 485305
R Bushill 10 Waun Road
St Dials, Cwmbran, Gwent,
NP44 7JN
Information
> Privacy Policy

'Swift Sixteen' offers high quality products in resin, brass and other mediums, for the 16mm garden railway modeller/enthusiast. We hope that you will enjoy browsing our website, and we will keep it updated regularly as new products are released.

PLEASE NOTE.

YOU ARE ONLY BUYING ONE REPLACEMENT INSERT TRAY. YOU ARE NOT BUYING AN MTM BOX OR AMMUNITION!

 

INSTRUCTIONS

 

The box has been made with a fitting strip on either end that needs to be filed, sanded or scraped down evenly on both ends so the insert is a good fit into your box. These stripes have been added due to shrinkage of the insert while being moulded and variations in the sizing of MTM boxes.

 

There are TWO sets of spacers, one for RWS (TWO dips in the bottom) and one for SK/Lapua (ONE dip in the bottom). All Eley boxes need no additions. Simply select the spacers you need for the ammo brand you intend to use in the open tray section. Fix one at each end with thin double sided tape. Make sure the spacer is centralised and sitting ON TOP of the raised lip. As an extra option, you could add a small drop of thin glue to hold it in place firmly (any glue would do).

 

See pics in the listing as they form part of the instructions.

 

Improved Mk2 version tray!

 

This tray is our Mk2 version insert that now includes a full set of spacers specifically designed for RWS - Lapua/SK trays. These spacers hold the oddly shaped and unstable ammo trays in a much better way in the recesses. These inserts stop the trays from kicking up when there are rounds only in the last few rows! The Mk2 insert now also has latch cutouts on both sides so the tray can be fitted either way for left or right handed shooters.

 

THE REASON WHY!

 

I am fortunate enough to be in a very large small bore shooting club with a strong emphasis on competitive shooting. I am also very lucky to be in the development squad run by some of the best shooters in the UK right now. I love my MTM ammo box, but my trainers do not!

 

The reason why they hate it so much is because it is not a good idea to transfer 22LR ammo from its original packaging into any ammo box that has holes in. The problems that will occur by putting 22LR ammo into a holed box are:-

 

1. The introduction of grit to the round from a dirty box.

2. Rifle can/will be damaged by shooting dirty ammo.

3. Cross contamination of differing lubricants and waxes.

4. Unnecessary removal of wax and lubricant from the round.

 

THE PRODUCT AND SOLUTION TO THE PROBLEM

 

The product we are offering is the solution to the above issues while still using the wonderful MTM ammo box. We can now offer you the shooter, a solid cast resin and washable full insert.

 

Our replacement insert is a very close fitting one piece resin casting that replaces the original MTM black tray. Our insert will hold two full unopened 22LR boxes and two boxes with the lids removed (ELEY) or full trays removed from the cardboard outer. There is also a row of 10 22LR holes that can be used to hold old used cases for inspection at a later date, snap caps or light strike rounds! The open boxes are set up the way they are, so that vertical 5 shot rows can be used and clearly seen.

 

The advantages of our insert:-

 

1. Easy storage of your prized 22LR ammo.

2. No cross contamination of any type to the ammo.

3. No lubricant needlessly removed from the rounds.

4. Rounds fully protected from dust blown across the range.

5. One piece casting that simply drops into the MTM box.

6. Holds Tenex full boxes.

7. Made for left or right handed shooters.

8. Comes with a full set of spacers for RWS/SK-Lapua.

 

Our MTM insert is cast in a highly durable and tough cast resin and grey in colour (shade may vary). It is UV proof and washable.

 

PLEASE NOTE.

YOU ARE ONLY BUYING ONE REPLACEMENT INSERT TRAY. YOU ARE NOT BUYING AN MTM BOX OR AMMUNITION!

 

S16 MTM AMMO INSERT

£12.00Price